F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

750
• ipv6 dhcp client pd
ipv6 dhcp pool
Use ipv6 dhcp pool to create a DHCPv6 address pool and enter DHCPv6 address pool view, or enter
DHCPv6 address pool view if the specified address pool already exists.
Use undo ipv6 dhcp pool to remove the address pool.
Syntax
ipv6 dhcp pool pool-number [ vpn-instance vpn-instance-name ]
undo ipv6 dhcp pool pool-number
Default
No DHCPv6 address pool is configured.
Views
System view
Default command level
2: System level
Parameters
pool-number: Address pool number. The value ranges from 1 to 128.
vpn-instance vpn-instance-name: Specifies a VPN by its name, a case-sensitive string of 1 to 31
characters. If no VPN is specified, the command creates an address pool for the public network.
Examples
# Create DHCPv6 address pool 1 and enter its view.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1]
ipv6 dhcp prefix-pool
Use ipv6 dhcp prefix-pool to create a prefix pool and specify the prefix and the length of the prefix
assigned.
Use undo ipv6 dhcp prefix-pool to remove the prefix pool.
Syntax
ipv6 dhcp prefix-pool prefix-pool-number prefix { prefix-number | prefix/prefix-len } assign-len
assign-len
undo ipv6 dhcp prefix-pool prefix-pool-number
Default
No prefix pool is configured.
Views
System view