F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

777
IPv6 static routing configuration commands
The term "router" in this document refers to both routers and routing-capable firewalls and UTM devices.
Feature and hardware compatibility
Hardware IPv6 static routin
g
com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
delete ipv6 static-routes all
Use delete ipv6 static-routes all to delete all IPv6 static routes.
Syntax
delete ipv6 [ vpn-instance vpn-instance-name ] static-routes all
Views
System view
Default command level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies a VPN by its name, a case-sensitive string of 1 to 31
characters. If no VPN is specified, the command deletes all IPv6 static routes for the public network.
Usage guidelines
When you use this command, the system prompts you to confirm the operation before deleting all the
IPv6 static routes.
The undo ipv6 route-static command deletes one IPv6 static route, and the delete ipv6 static-routes all
command deletes all IPv6 static routes, including the default route.
Examples
# Delete all IPv6 static routes.
<Sysname> system-view
[Sysname] delete ipv6 static-routes all
This will erase all ipv6 static routes and their configurations, you must reconfigure all
static routes
Are you sure?[Y/N]y