F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

793
<Sysname> reset ripng 100 process
Warning : Reset RIPng process? [Y/N]:Y
reset ripng statistics
Use reset ripng statistics to clear the statistics of the specified RIPng process.
Syntax
reset ripng process-id statistics
Views
User view
Default command level
1: Monitor level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
Examples
# Clear the statistics of RIPng process 100.
<Sysname> reset ripng 100 statistics
ripng
Use ripng to create a RIPng process and enter RIPng view.
Use undo ripng to disable a RIPng process.
Syntax
ripng [ process-id ] [ vpn-instance vpn-instance-name ]
undo ripng [ process-id ] [ vpn-instance vpn-instance-name ]
Default
No RIPng process is enabled.
Views
System view
Default command level
2: System level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535. The default value is 1.
vpn-instance vpn-instance-name: Specifies a VPN by its name, a case-sensitive string of 1 to 31
characters.
Usage guidelines
If no VPN is specified, the RIPng process is enabled for the public network.
The specified VPN instance must have been created with the ip vpn-instance command.
Before configuring global RIPng parameters, you must create a RIPng process. This requirement does not
apply to interface RIPng parameter configuration.