F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

796
Usage guidelines
The IPsec policy to be applied must have been configured.
Examples
# Apply IPsec policy policy001 to interface GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ripng ipsec-policy policy001
ripng metricin
Use ripng metricin to specify an additional metric for received RIPng routes.
Use undo ripng metricin to restore the default.
Syntax
ripng metricin value
undo ripng metricin
Default
The additional metric to received routes is 0.
Views
Interface view
Default command level
2: System level
Parameters
value: Additional metric for received routes, in the range of 0 to 16.
Examples
# Specify the additional routing metric as 12 for RIPng routes received by GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ripng metricin 12
Related commands
ripng metricout
ripng metricout
Use ripng metricout to configure an additional metric for RIPng routes advertised by an interface.
Use undo rip metricout to restore the default.
Syntax
ripng metricout value
undo ripng metricout
Default
The default additional routing metric is 1.