F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

797
Views
Interface view
Default command level
2: System level
Parameters
value: Additional metric to advertised routes, in the range of 1 to 16.
Examples
# Set the additional metric to 12 for routes advertised by GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ripng metricout 12
Related commands
ripng metricin
ripng poison-reverse
Use ripng poison-reverse to enable the poison reverse function.
Use undo ripng poison-reverse to disable the poison reverse function.
Syntax
ripng poison-reverse
undo ripng poison-reverse
Default
The poison reverse function is disabled.
Views
Interface view
Default command level
2: System level
Examples
# Enable the poison reverse function for RIPng update messages on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ripng poison-reverse
ripng split-horizon
Use ripng split-horizon to enable the split horizon function.
Use undo ripng split-horizon to disable the split horizon function.
Syntax
ripng split-horizon
undo ripng split-horizon