F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

802
Examples
# Summarize networks 2000:1:1:1::/64 and 2000:1:1:2::/64 in Area 1 with 2000:1:1::/48.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 1
[Sysname-ospfv3-1-area-0.0.0.1] abr-summary 2000:1:1:: 48
area (OSPFv3 view)
Use area to enter OSPFv3 area view.
Syntax
area area-id
Views
OSPFv3 view
Default command level
2: System level
Parameters
area-id: ID of an area, a decimal integer (in the range of 0 to 4294967295 and changed to IPv4 address
format by the system) or an IPv4 address.
Usage guidelines
The undo form of the command is not available. An area is removed automatically if no configuration is
made and no interface is up in the area.
Examples
# Enter OSPFv3 Area 0 view.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 0
[Sysname-ospfv3-1-area-0.0.0.0]
bandwidth-reference
Use bandwidth-reference to specify a reference bandwidth value for link cost calculation.
Use undo bandwidth-reference to restore the default value.
Syntax
bandwidth-reference value
undo bandwidth-reference
Default
The default value is 100 Mbps.
Views
OSPFv3 view