F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

830
Examples
# Disable the logging on neighbor state changes of OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] undo log-peer-change
maximum load-balancing (OSPFv3 view)
Use maximum load-balancing to configure the maximum number of equal-cost multi-path (ECMP) routes
for load balancing.
Use undo maximum load-balancing to restore the default.
Syntax
maximum load-balancing maximum
undo maximum load-balancing
Default
The maximum number of ECMP routes is 8.
Views
OSPFv3 view
Default command level
2: System level
Parameters
maximum: Specifies the maximum number of ECMP routes, in the range of 1 to 8.
Examples
# Configure the maximum number of ECMP routes as 6.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] maximum load-balancing 6
ospfv3
Use ospfv3 to enable an OSPFv3 process and enter OSPFv3 view.
Use undo ospfv3 to disable an OSPFv3 process.
Syntax
ospfv3 [ process-id ] [ vpn-instance vpn-instance-name ]
undo ospfv3 [ process-id ]
Default
The system runs no OSPFv3 process.
Views
System view