F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

929
IPv6 routing table displaying commands
The term "router" in this document refers to both routers and routing-capable firewalls and UTM devices.
Feature and hardware compatibility
Hardware Commands com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
display ipv6 routing-table
Use display ipv6 routing-table to display brief IPv6 routing table information, including destination IP
address and prefix, protocol type, priority, metric, next hop and output interface.
Use display ipv6 routing-table verbose to display detailed information about all IPv6 routes, including
both active and inactive routes.
Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies a VPN by its name, a case-sensitive string of 1 to 31
characters. Without this option, the command displays routing information for the public network.
verbose: Displays detailed information about all IPv6 routes, including both active and inactive routes.
Without this keyword, the command displays only brief information about active routes.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.