F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

932
Usage guidelines
If the specified IPv6 ACL is not available, the command displays all routing information.
Examples
# Display brief information about routes permitted by IPv6 ACL 2000.
<Sysname> display ipv6 routing-table acl 2000
Routes Matched by Access list 2000 :
Summary Count : 2
Destination : ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination : 1:1::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
For command output, see Table 212.
display ipv6 routing-table ipv6-address
Use display ipv6 routing-table ipv6-address to display information about routes to an IPv6 destination
address.
Use display ipv6 routing-table ipv6-address1 ipv6-address2 to display information about routes to a
range of IPv6 destination addresses.
Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] ipv6-address [ prefix-length ]
[ longer-match ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
display ipv6 routing-table [ vpn-instance vpn-instance-name ] ipv6-address1 prefix-length1
ipv6-address2 prefix-length2 [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies a VPN by its name, a case-sensitive string of 1 to 31
characters. Without this option, the command displays routing information for the public network.
ipv6-address: Specifies an IPv6 destination address.
prefix-length: Specifies the prefix length in the range of 0 to 128.
longer-match: Displays the matched route entry with the longest prefix length.
ipv6-address1/ipv6-address2: Specifies an IPv6 destination address range.
prefix-length1/prefix-length2: Specifies the prefix length in the range of 0 to 128.
verbose: Displays detailed information about all routes. Without this keyword, the command displays
only brief information about active routes.