F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

938
Table 214 Command output
Field Descri
p
tion
Protocol Routing protocol hat installed the route.
route Number of routes installed by the protocol.
active Number of active routes.
added
Number of routes added to the routing table after the router started up or the routing table
was last cleared.
deleted Number of routes marked as deleted, which will be cleared after a period.
freed Number of routes that got freed (removed permanently)
Total Total number of routes.
reset ipv6 routing-table statistics
Use reset ipv6 routing-table statistics to clear IPv6 route statistics.
Syntax
reset ipv6 routing-table statistics protocol [ vpn-instance vpn-instance-name ] { protocol | all }
Views
User view
Default command level
2: System level
Parameters
vpn-instance vpn-instance-name: Clears route statistics for a VPN specified by its name, a case-sensitive
string of 1 to 31 characters. Without this option, the command clears routing statistics for the public
network.
protocol: Clears route statistics for an IPv6 routing protocol. It can be bgp4+, direct, isisv6, ospfv3, ripng,
or static.
The following matrix shows the values for the protocol argument on different firewalls and UTM devices:
Hardware Protocols
F1000-A-EI/F1000-S-EI bgp4+, direct, ospfv3, ripng, and static
F1000-E bgp4+, direct, ospfv3, ripng, and static
F5000 bgp4+, direct, isisv6, ospfv3, ripng, and static
Firewall module bgp4+, direct, ospfv3, ripng, and static
U200-A bgp4+, direct, ospfv3, ripng, and static
U200-S N/A
all: Clears route statistics for all IPv6 routing protocols.
Examples
# Clear route statistics for the public network.