F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

949
max-len: Specifies the maximum IPv6 packet length in bytes, in the range of 1 to 65535. The value of
max-len cannot be smaller than that of min-len.
Examples
# Match the IPv6 packets with a length from 100 to 200 bytes.
<Sysname> system-view
[Sysname] ipv6 policy-based-route aa permit node 11
[Sysname-pbr6-aa-11] if-match packet-length 100 200
ipv6 local policy-based-route
Use ipv6 local policy-based-route to configure IPv6 local PBR based on a policy.
Use undo ipv6 local policy-based-route to remove the configuration.
Syntax
ipv6 local policy-based-route policy-name
undo ipv6 local policy-based-route [ policy-name ]
IPv6 local PBR is not configured by default.
Default
IPv6 local PBR is not configured.
Views
System view
Default command level
2: System level
Parameters
policy-name: Specifies the policy name, a string of 1 to 19 characters.
Usage guidelines
You can configure only one IPv6 policy for local PBR. If you perform this command multiple times, only
the last specified policy takes effect.
Local PBR is used to route locally generated packets. Do not configure IPv6 local PBR unless required.
Examples
# Configure IPv6 local PBR based on policy AAA.
<Sysname> system-view
[Sysname] ipv6 local policy-based-route AAA
ipv6 policy-based-route (interface view)
Use ipv6 policy-based-route to configure IPv6 PBR by applying a policy on the interface.
Use undo ipv6 policy-based-route to remove the configuration.
Syntax
ipv6 policy-based-route policy-name
undo ipv6 policy-based-route