F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

968
c-bsr hash-length (IPv6 PIM view)
Use c-bsr hash-length to configure the global Hash mask length.
Use undo c-bsr hash-length to restore the default.
Syntax
c-bsr hash-length hash-length
undo c-bsr hash-length
Default
The Hash mask length is 126.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
hash-length: Specifies a hash mask length, in the range of 0 to 128.
Examples
# Set the global Hash mask length to 16.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr hash-length 16
Related commands
c-bsr
c-bsr holdtime (IPv6 PIM view)
Use c-bsr holdtime to configure the BS timeout timer, namely, the time that the C-BSRs wait for a bootstrap
message from the BSR.
Use undo c-bsr holdtime to restore the default.
Syntax
c-bsr holdtime interval
undo c-bsr holdtime
Default
This formula determines the bootstrap timeout value: BS timeout = BS period × 2 + 10. The default BS
period is 60 seconds, so the default BS timeout timer is 60 × 2 + 10 = 130 (seconds).
Views
IPv6 PIM view
Default command level
2: System level