F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

77
{ Set the VLAN ID to 10.
{ Click Apply to map MSTI 1 to VLAN 10.
{ Select 3 from the Instance ID list.
{ Set the VLAN ID to 30.
{ Click Apply to map MSTI 3 to VLAN 30.
{ Select 4 from the Instance ID list.
{ Set the VLAN ID to 40.
{ Click Apply to map MSTI 4 to VLAN 40.
d. Click Activate.
Figure 51 Configuring an MST region on Device A
2. Enable MSTP globally and configure the current device as the root bridge of MSTI 1:
a. Select Network > MSTP > Global from the navigation tree.
b. Perform the following configurations on the page shown in 2230HFigure 52:
{ Select Enable in the Enable STP Globally list.
{ Select MSTP from the Mode list.
{ Select the Instance box.
{ Set the Instance ID field to 1.
{ Set the Root Type field to Primary.
c. Click Apply.