F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

111
Ste
p
Command Remarks
198. Configure local or remote
AAA authentication.
For local AAA authentication, the username
and password of the supplicant must be
configured on the authenticator.
For remote AAA authentication, the
username and password of the supplicant
must be configured on the remote AAA
server.
For more information about AAA
authentication, see Access Control
Configuration Guide.
The username and
password configured for the
supplicant must be the same
as those configured on the
supplicant.
2. Configuring the supplicant
Ste
p
Command Remarks
199. Enter system view. system-view N/A
200. Enter interface view.
interface
interface-type
interface-number
N/A
201. Configure the PAP username and
password sent from the local device
to the supplicant when the local
device is authenticated by the
supplicant by using PAP.
ppp pap local-user
username
password
{
cipher
|
simple
} password
By default, when being
authenticated by the supplicant
using PAP, the local device sends
null username and password to the
supplicant.
1163BConfiguring CHAP authentication
According to whether the authenticator is configured with a username or not, the configuration of CHAP
authentication falls into the following two types:
1. Configuring CHAP authentication when the authenticator name is configured
To configure the authenticator:
Ste
p
Command Remarks
202. Enter system view.
system-view N/A
203. Enter interface view.
interface
interface-type
interface-number
N/A
204. Configure the local
device to authenticate
the supplicant by using
CHAP.
ppp authentication-mode chap
[ [
call-in
]
domain
isp-name ]
By default, PPP authentication is
disabled.
205. Assign a username to the
CHAP authenticator.
ppp chap user
username
The username you assign to the
authenticator must be the same as
the local username you assign to
the authenticator on the supplicant.