F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

112
Ste
p
Command Remarks
206. Configure local or
remote AAA
authentication.
For local AAA authentication, the
username and password of the
supplicant must be configured on the
authenticator.
For remote AAA authentication, the
username and password of the
supplicant must be configured on the
remote AAA server.
For more information about AAA
authentication, see Access Control
Configuration Guide.
The username configured for the
supplicant must be the same as that
configured on the supplicant.
The passwords configured for the
authenticator and supplicant must
be the same.
To configure the supplicant:
Ste
p
Command Remarks
207. Enter system view.
system-view N/A
208. Enter interface view.
interface interface-type interface-number N/A
209. Assign a username to
the CHAP supplicant.
ppp chap user username
The username you assign to the
supplicant here must be the same
as the local username you assign
to the supplicant on the
authenticator.
210. Configure local or
remote AAA
authentication.
For local AAA authentication, the
username and password of the supplicant
must be configured on the authenticator.
For remote AAA authentication, the
username and password of the supplicant
must be configured on the remote AAA
server.
For more information about AAA
authentication, see Access Control
Configuration Guide.
The username configured for the
supplicant must be the same as
that configured on the supplicant.
The passwords configured for the
authenticator and supplicant must
be the same.
2. Configuring CHAP authentication when no authenticator name is configured
To configure the authenticator:
Ste
p
Command Remarks
211. Enter system view.
system-view N/A
212. Enter interface view. interface
interface-type interface-number
N/A
213. Configure the local device to
authenticate the supplicant
by using CHAP.
ppp authentication-mode chap
[ [
call-in
]
domain
isp-name ]
By default, PPP
authentication is disabled.