F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

125

Figure 61 Network structure 1

• As shown in 2324HFigure 62, the PPPoE session is established between each host (PPPoE client) and the

carrier router (PPPoE server). The service provider assigns an account to each host for billing and

control. The host must be installed with PPPoE client dialup software. This network structure is

applicable to campus and residential environments.

Figure 62 Network structure 2

460BProtocols and standards

RFC 2516, A Method for Transmitting PPP Over Ethernet (PPPoE)

91B

Configuring a PPPoE client in the Web interface

461BConfiguring a PPPoE client

1. Select Network > PPPoE > Client from the navigation tree.

Router B

Host A Host B Host C

Modem

PPPoE server

PPPoE clientRouter A

DSLAM

Internet

Client device

Carrier device

Internet

PPPoE server

Host A

Host B

Router

PPPoE client