F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

147
[Firewall-Ten-GigabitEthernet0/0.102] port link-type access
[Firewall-Ten-GigabitEthernet0/0.102] port access vlan 1000
[Firewall-Ten-GigabitEthernet0/0.102] quit
[Firewall] interface ten-gigabitethernet 0/0.103
[Firewall-Ten-GigabitEthernet0/0.103] port link-mode bridge
[Firewall-Ten-GigabitEthernet0/0.103] port link-type access
[Firewall-Ten-GigabitEthernet0/0.103] port access vlan 1000
96B
Displaying frame forwarding statistics
NOTE:
This section describes how to display frame forwarding statistics in the Web interface. For information
about displaying frame forwarding statistics at the CLI, see
2336HDisplayin
g
and maintainin
g
normal Layer 2
forwarding and
2337HDisplaying and maintaining inline Layer 2 forwarding.
479BOverview
The frame forwarding statistics module allows you to display the frame forwarding statistics of all the
Layer 2 interfaces on the device.
480BDisplaying frame forwarding statistics
Select Network > Statistics > L2 Statistics from the navigation tree to enter the page for displaying frame
forwarding statistics.
Figure 79 Frame forwarding statistics
Click Eliminate to clear the statistics, or click Refresh to update the statistics on the page.