F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

161
Item Descri
p
tion
Client Domain Name
Enter the domain name suffix for the client.
With the suffix assigned, the client only needs to input part of a domain name, and the
system adds the domain name suffix for name resolution.
Gateway Address
Enter the gateway addresses for the client.
A DHCP client that wants to access an external host needs to send requests to a
gateway. You can specify gateways in each address pool and the DHCP server
assigns gateway addresses while assigning an IP address to the client.
Up to eight gateways can be specified in a DHCP address pool, separated by
commas.
DNS Server Address
Enter the DNS server addresses for the client.
To allow the client to access a host on the Internet through DNS, you need to specify
a DNS server address.
Up to eight DNS servers can be specified in a DHCP address pool, separated by
commas.
WINS Server Address
Enter the WINS server addresses for the client.
If b-node is specified for the client, you do not need to specify any WINS server
address.
Up to eight WINS servers can be specified in a DHCP address pool, separated by
commas.
NetBIOS Node Type Select the NetBIOS node type for the client.
492BCreating a dynamic address pool for the DHCP server
1. From the navigation tree, select Network > DHCP > DHCP Server to enter the page shown in 2358HFigure
94.
2. Select the Dynamic option in the Address Pool field to view all dynamic address pools.
3. Click Add.
Figure 96 Creating a dynamic address pool