F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

170
Figure 107 Configuring DHCP child address pool 2
b. Enter pool2 for IP Pool Name, 10.1.1.128 for IP Address, and 255.255.255.128 for Mask, set
Lease Duration to 5 days, 0 hours, 0 minutes, and 0 seconds, and enter 10.1.1.254 for
Gateway Address.
c. Click Apply.
1204BVerifying the configuration
After the preceding configuration is complete, clients in subnets 10.1.1.0/25 and 10.1.1.128/25 can
obtain corresponding IP addresses and other configuration information from the DHCP server Firewall.
From the navigation tree, select Network > DHCP > DHCP Server on Firewall and view the client IP
address assigned by the DHCP server in Address in Use.
103B
Configuring the DHCP server at the CLI
497BDHCP server configuration task list
Task Remarks
2365H
Configuring an address pool on the DHCP server Required.
2366H
Enabling DHCP Required.
2367H
Enabling the DHCP server on an interface
2368H
Enabling DHCP Required.
2369H
Applying an extended address pool on an interface
Required by the extended address pool
configuration.
When configuring a common address
pool, ignore this task.
2370H
Configuring the DHCP server security functions Optional.
2371H
Enabling client offline detection Optional.
2372H
Enabling handling of Option 82 Optional.
2373H
Specifying the threshold for sending trap messages Optional.