F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

171
498BConfiguring an address pool on the DHCP server
1205BConfiguration task list
Task Remarks
2374H
Creating a DHCP address pool Required.
2375H
Configuring address
allocation mode for a
common address pool
2376H
Configuring static address allocation
Required to configure either
of the two for the common
address pool configuration.
2377H
Configuring dynamic address allocation
2378H
Configuring dynamic address allocation for an extended address pool
Required for the extended
address pool configuration.
2379H
Configuring a domain name suffix for the client
Optional.
2380H
Configuring DNS servers for the client
2381H
Configuring WINS servers and NetBIOS node type for the client
2382H
Configuring BIMS server information for the client
2383H
Configuring gateways for the client
2384H
Configuring the TFTP server and bootfile name for the client
2385H
Specifying a server's IP address for the DHCP client
2386H
Configuring self-defined DHCP options
1206BCreating a DHCP address pool
When you create a DHCP address pool, specify it as a common address pool or an extended address
pool.
To create a DHCP address pool:
Ste
p
Command Remarks
327. Enter system view. system-view N/A
328. Create a DHCP address pool
and enter its view.
dhcp server ip-pool pool-name
[ extended ]
No DHCP address pool is created by
default.
A common address pool and an extended address pool are different in address allocation mode
configuration. Configurations of other parameters (such as the domain name suffix and DNS server
address) for them are the same.
1207BConfiguring address allocation mode for a common address pool
CAUTION:
You can configure either a static binding or dynamic address allocation for a common address pool, bu
t
not both.
You need to specify a subnet for dynamic address allocation. A static binding is a special address pool
containing only one IP address.
• Configuring static address allocation