F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100
175
1211BConfiguring WINS servers and NetBIOS node type for the client
A Microsoft DHCP client using NetBIOS protocol must contact a Windows Internet Naming Service
(WINS) server for name resolution. You can specify up to eight WINS servers for such clients in a DHCP
address pool.
Specify a NetBIOS node type for the clients to approach name resolution. There are four NetBIOS node
types:
• b (broadcast)-node—A b-node client sends the destination name in a broadcast message. The
destination returns its IP address to the client after receiving the message.
• p (peer-to-peer)-node—A p-node client sends the destination name in a unicast message to the
WINS server, and the WINS server returns the destination IP address.
• m (mixed)-node—An m-node client broadcasts the destination name. If it receives no response, it
unicasts the destination name to the WINS server to get the destination IP address.
• h (hybrid)-node—An h-node client unicasts the destination name to the WINS server. If it receives
no response, it broadcasts the destination name to get the destination IP address.
To configure WINS servers and NetBIOS node type in a DHCP address pool:
Ste
p
Command
Remarks
354. Enter system view. system-view N/A
355. Enter DHCP address pool
view.
dhcp server ip-pool pool-name
[ extended ]
N/A
356. Specify WINS servers.
nbns-list ip-address&<1-8>
Optional for b-node.
No WINS server is specified by default.
357. Specify the NetBIOS node
type.
netbios-type { b-node |
h-node | m-node | p-node }
Not specified by default.
1212BConfiguring BIMS server information for the client
Perform this task to provide the Branch Intelligent Management System (BIMS) server IP address, port
number, and shared key for the clients. The DHCP clients contact the BIMS server to get configuration files
and perform software update and backup.
To configure the BIMS server IP address, port number, and shared key in the DHCP address pool:
Ste
p
Command
Remarks
358. Enter system view.
system-view N/A
359. Enter DHCP address pool
view.
dhcp server ip-pool pool-name
[ extended ]
N/A
360. Specify the BIMS server IP
address, port number, and
shared key.
bims-server ip ip-address [ port
port-number ] sharekey [ cipher |
simple ] key
No BIMS server information is
specified by default.
1213BConfiguring gateways for the client
Ste
p
Command
Remarks
361. Enter system view. system-view N/A