F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

184
Figure 109 Network diagram
1230BConfiguration procedure
1. Specify IP addresses for interfaces. (Details not shown.)
2. Configure the DHCP server:
# Enable DHCP.
<Firewall> system-view
[Firewall] dhcp enable
# Enable the DHCP server on GigabitEthernet 0/1 and GigabitEthernet 0/2.
[Firewall] interface ethernet 1/1
[Firewall-GigabitEthernet0/1] dhcp select server global-pool
[Firewall-GigabitEthernet0/1] quit
[Firewall] interface gigabitethernet 0/2
[Firewall-GigabitEthernet0/2] dhcp select server global-pool
[Firewall-GigabitEthernet0/2] quit
# Exclude IP addresses from dynamic allocation (addresses of the DNS server, WINS server, and
gateways).
[Firewall] dhcp server forbidden-ip 10.1.1.2
[Firewall] dhcp server forbidden-ip 10.1.1.4
[Firewall] dhcp server forbidden-ip 10.1.1.126
[Firewall] dhcp server forbidden-ip 10.1.1.254
# Configure DHCP address pool 0 (subnet, client domain name suffix, and DNS server address).
[Firewall] dhcp server ip-pool 0
[Firewall-dhcp-pool-0] network 10.1.1.0 mask 255.255.255.0
[Firewall-dhcp-pool-0] domain-name aabbcc.com
[Firewall-dhcp-pool-0] dns-list 10.1.1.2
[Firewall-dhcp-pool-0] quit
# Configure DHCP address pool 1 (subnet, gateway, WINS server, and lease duration).
[Firewall] dhcp server ip-pool 1
[Firewall-dhcp-pool-1] network 10.1.1.0 mask 255.255.255.128
[Firewall-dhcp-pool-1] gateway-list 10.1.1.126
[Firewall-dhcp-pool-1] expired day 10 hour 12
[Firewall-dhcp-pool-1] nbns-list 10.1.1.4
[Firewall-dhcp-pool-1] quit
# Configure DHCP address pool 2 (subnet, gateway and lease duration).