F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

194
Figure 118 Network diagram
1239BConfiguring Firewall
You must also configure the DHCP server on Router. For more information about DHCP server
configuration, see "
2411HConfiguring the DHCP server."
Because the DHCP relay agent and server are on different subnets, you need to configure static routing
or a dynamic routing protocol to make them reachable to each other.
1. Specify IP addresses for interfaces and create security zones. (Details not shown.)
2. Enable DHCP:
a. From the navigation tree, select Network > DHCP > DHCP Relay.
Router
DHCP server
Firewall
DHCP relay
DHCP client DHCP client
DHCP clientDHCP client
GE0/2
10.1.1.2/24
GE0/1
10.10.1.1/24
Eth1/1
10.1.1.1/24