F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

195
Figure 119 Enabling the DHCP service
b. Select the Enable option in the DHCP Service field.
c. Click Apply.
3. Configure a DHCP server group:
a. In the Server Group field, click Add.
Figure 120 Creating a DHCP server group
b. Enter 1 for Server Group ID.
c. Enter 10.1.1.1 for IP Address.
d. Click Apply.
4. Enable the DHCP relay agent on GigabitEthernet 0/1:
a. In the Interface Config field, click the icon of GigabitEthernet 0/1.