F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

196
Figure 121 Enabling DHCP relay agent on interface GigabitEthernet 0/1
b. Select the Enable option in the DHCP Relay field.
c. Select 1 for Server Group ID.
d. Click Apply.
After the preceding configuration is complete, DHCP clients can obtain IP addresses and other
configuration information from the DHCP server through the DHCP relay agent.
107B
Configuring the DHCP relay agent at the CLI
518BDHCP relay agent configuration task list
Task Remarks
2412H
Enabling DHCP Required.
2413H
Enabling the DHCP relay agent on an interface Required.
2414H
Correlating a DHCP server group with a relay agent interface Required.
2415H
Configuring the DHCP relay agent security functions Optional.
2416H
Enabling client offline detection Optional.
2417H
Configuring the DHCP relay agent to release an IP address Optional.
2418H
Configuring the DHCP relay agent to handle Option 82 Optional.
519BConfiguring the DHCP relay agent
1240BEnabling DHCP
Enable DHCP to validate other DHCP relay agent settings.
To enable DHCP:
Ste
p
Command Remarks
398. Enter system view.
system-view
N/A
399. Enable DHCP.
dhcp enable Disabled by default.
1241BEnabling the DHCP relay agent on an interface
With the DHCP relay agent enabled, an interface forwards incoming DHCP requests to a DHCP server
for address allocation.