F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

215
1258BStatic name resolution table configuration task list
Task Remarks
2431H
Configuring static name resolution
entries
Required.
By default, no name-IP address mapping exists in a static name
resolution table.
1259BDynamic domain name resolution configuration task list
Task Remarks
2432H
Configuring dynamic domain name resolution
Required.
This function is disabled by default.
2433H
Configuring DNS server addresses
Required.
Not configured by default.
2434H
Configuring domain name suffixes
Optional.
Not configured by default.
2435H
Clearing dynamic domain name cache Optional.
1260BDNS proxy configuration task list
Task Remarks
2436H
Configuring DNS proxy
Required.
By default, the device is not a DNS proxy.
2437H
Configuring DNS server addresses
Required.
Not configured by default.
537BConfiguring static name resolution entries
1. From the navigation tree, select Network > DNS > Static.
The static domain name resolution configuration page appears, as shown in
2438HFigure 129.
2. Click Add.
The page for creating a static domain name resolution entry appears, as shown in
2439HFigure 130 .
Figure 129 Static domain name resolution configuration page