F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

218
543BDynamic domain name resolution configuration example
1261BNetwork requirements
The IP address of the DNS server is 2.1.1.2/16 and the domain name suffix is com.
Firewall serving as a DNS client uses dynamic domain name resolution to access the host with the
domain name host.com and the IP address 3.1.1.1/16, as shown in
2445HFigure 134.
Figure 134 Network diagram
Before performing the following configuration, make sure the device and the host are reachable to each
other, and related configurations are done on both the device and the host. For the IP addresses of the
interfaces, see
2446HFigure 134.
This configuration may vary with different DNS servers. The following configuration is performed on a PC
running Windows server 2000.
1262BConfiguring the DNS server
1. Create zone com:
a. Select Start > Programs > Administrative Tools > DNS.
The DNS server configuration page appears.
b. As shown in 2447HFigure 135, right-click Forward Lookup Zones.
c. Select New zone, and then follow the instructions to create a new zone named com.
Figure 135 Creating a zone