F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

245
565BCreating a static ARP entry
1. From the navigation tree, select Firewall > ARP Management > ARP Table.
The ARP Table configuration page shown in
2471HFigure 159 appears.
2. Click Add.
The New Static ARP Entry page appears.
Figure 160 Adding a static ARP entry
3. Configure a static ARP entry as described in 2472HTable 32.
4. Click Apply.
Table 32 Configuration items
Item Descri
p
tion
IP Address Enter an IP address for the static ARP entry.
MAC Address Enter a MAC address for the static ARP entry.
Advanced
Options
VLAN ID Enter a VLAN ID and specify a port for the static ARP entry.
IMPORTANT:
The VLAN ID must be the ID of an existing VLAN, and the port must belong to the
VLAN. The corresponding VLAN interface must also exist.
Port
VPN
Instance
Enter the name of the VPN instance to which the static ARP entry belongs.
566BEnabling dynamic ARP learning
1. From the navigation tree, select Firewall > ARP Management > Dynamic Entry.
The dynamic entry management page appears.