F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

247
Figure 163 Network diagram
1291B Configuring Firewall
Before the following configurations, if the operating mode of interface GigabitEthernet 0/1 is router
mode, select Device Management > Interface from the navigation tree and change the operating mode
of the interface to bridge mode.
1. Create VLAN 10:
a. From the navigation tree, select Network > VLAN > VLAN.
b. Click Add.
The VLAN configuration page appears.
c. Enter 10 for VLAN ID.
d. Click Apply.
Figure 164 Creating a VLAN
2. Add GigabitEthernet 0/1 to VLAN 1:
a. Click the icon corresponding to VLAN 10 on the VLAN page, and modify the VLAN
configuration, as shown in
2476H Figure 165.
b. Set GigabitEthernet 0/1 as an untagged member of VLAN 10.
c. Click Apply.