F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

6
Figure 4 Modifying interface information
3. Modify the interface as described in 2152HTable 2 and 2153HTable 1.
4. Click Apply.
Table 2 Configuration items
Item Descri
p
tion
Interface Type Set the interface type, which can be None.
Interface Status
Display and set the interface status:
• Connected—Indicates that the current interface is up and connected, click the
Disable button to shut down the interface.
• Not connected—Indicates that the current interface is up, but not connected,
click the Disable button to shut down the interface.
• Administratively Down—Indicates that the current interface is shut down by a
network administrator, click the Enable button to bring up the interface.
After you click the Enable/Disable button, the page displaying interface
information appears automatically.