F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

286
4. Click Close when the dialog box prompts that the configuration succeeds.
Table 39 Configuration items
Item Descri
p
tion
Behavior Name Name of the traffic behavior being configured.
CAR
CAR Configure CAR for data packets.
Enable/Disable Enable or disable CAR.
CIR
Set the CIR, the average traffic
rate.
For bursty traffic to be handled
effectively, make sure the ratio of
CBS to CIR is at least 100:16.
CBS
Set the CBS, number of bits that
can be sent in each interval.
Green
Discard Set the action to perform for conforming packets (green packets):
• Discard—Drops the packets.
• Pass—Permits the packets to pass through.
• Pass (Remark DSCP)—Sets a specific DSCP value for the packets and
permits the packets to pass through. With this option selected, you
must select a DSCP value.
By default, conforming packets are permitted to pass through.
Pass
Pass
(Remark
DSCP)
Remark
IP Precedence
Mark matching packets with the selected IP precedence.
Selecting Not Set disables the IP precedence marking action.
DSCP
Mark matching packets with the selected DSCP precedence.
Selecting Not Set disables the DSCP marking action.
Local Precedence
Mark matching packets with the selected local precedence.
Selecting Not Set disables local precedence marking.
This configuration item is not supported.
Dot1p
Mark matching packets with the selected 802.1p priority.
Selecting Not Set disables 802.1p priority marking.
Queue
Queue
Configure CBQ for packets.
If this box is not selected, FIFO schedules packets by
default.
These
configuration
items are not
supported. .
EF
EF Configure EF.
Max
Bandwidth
Configure the maximum bandwidth for EF.
CBS
Configure the CBS for EF when the Max Bandwidth
option is selected.
Percent Configure the percent of available bandwidth for EF.
CBS-Ratio
Configure the ratio of CBS to CIR for EF when the
Percent option is selected.
AF
AF Configure AF.
Max
Bandwidth
Configure the minimum guaranteed bandwidth for
AF.
Percent Configure the percent of available bandwidth for AF.