F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

289
Figure 192 QoS policies applied to interfaces
2. Click Apply Policy to enter the page for applying a QoS policy to an interface.
Figure 193 Applying a QoS policy to an interface
3. Apply the QoS policy to an interface as described in 2503HTable 40.
4. Click Apply.
Table 40 Configuration items
Item Descri
p
tion
Interface Name Specify the interface to which the policy is to be applied.
Policy Name Select the QoS policy to be applied.
Direction
Specify the direction in which the policy is to be applied.
• Inbound—Applies the policy to the incoming packets on the specified interface.
• Outbound—Applies the policy to the outgoing packets on the specified interface.
NOTE:
To apply a QoS policy to the inbound direction of a VLAN interface, you must apply it
in VLAN interface view. To the outbound direction, you must apply it in interface view
of each physical interface of the VLAN.
602BConfiguring port bandwidth limit
The following matrix shows the feature and hardware compatibility:
Hardware Feature com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E No
F5000 No
Firewall module No