F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

293
606BDisplaying and maintaining QoS policies
Task Command Remarks
Display traffic class
configuration.
display traffic classifier
{ system-defined | user-defined }
[ classifier-name ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Support for the system-defined keyword
depends the device model. For more
information, see this command in Network
Management Command Reference.
Display traffic
behavior
configuration.
display traffic behavior
{ system-defined | user-defined }
[ behavior-name ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Support for the system-defined keyword
depends the device model. For more
information, see this command in Network
Management Command Reference.
Display
system-defined or
user-defined QoS
policy
configuration.
display qos policy { system-defined |
user-defined } [ policy-name
[ classifier classifier-name ] ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Support for the system-defined keyword
depends the device model. For more
information, see this command in Network
Management Command Reference.
Display QoS policy
configuration on the
specified or all
interfaces.
display qos policy interface
[ interface-type interface-number ]
[ inbound | outbound ] [ pvc
{ pvc-name [ vpi/vci ] | vpi/vci } ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
151B
Configuring line rate on a port
The line rate on a port can be configured only in the Web interface.
The following matrix shows the feature and hardware compatibility:
Hardware Feature com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E No
F5000 No
Firewall module No
U200-A Yes
U200-S Yes
To configure line rate on a port:
1. Select Firewall > QoS > Line rate from the navigation tree.
2. Click the Setup tab.