F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

299
a. Select Firewall > QoS > Policy from the navigation tree.
b. Click Add.
c. Enter policy as the policy name.
d. Click Apply.
Figure 204 Creating a policy named policy
e. Select policy from the Policy Name list.
f. Click Add Relation.
g. Select classifier_server from the Classifier Name list. Select behavior_server from the Behavior
Name list.
h. Click Apply.
Figure 205 Configuring class-behavior associations for the policy named policy
i. Select policy from the Policy Name list.
j. Click Add Relation.
k. Select classifier_host from the Classifier Name list. Select behavior_host from the Behavior
Name list.
l. Click Apply.
8. Apply the policy named policy to the incoming packets of GigabitEthernet 0/1:
a. Select Firewall > Traffic Policing > Apply from the navigation tree.
b. Click Apply Policy.
c. Select GigabitEthernet 0/1 from the Interface Name list. Select policy from the Policy Name list.
Select Inbound from the Direction list.
d. Click Apply.