F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

302
c. Enter the ACL number 3001.
d. Click Apply.
e. Click the icon for ACL 3001 on the ACL list.
f. Click Add.
g. Select Permit in the Operation list. Select the Destination IP Address box, and enter IP address
192.168.0.2 and destination wildcard 0.0.0.0.
h. Click Apply.
3. Configure ACL 3002 to match packets with destination address 192.168.0.3:
a. Click Back on the page displaying the rules of ACL 3001.
b. Click Add.
c. Enter the ACL number 3002.
d. Click Apply.
e. Click the icon for ACL 3002 on the ACL list.
f. Click Add.
g. Select Permit in the Operation list. Select the Destination IP Address box, and enter IP address
192.168.0.3 and destination wildcard 0.0.0.0.
h. Click Apply.
4. Configure class classifier_dbserver to match packets based on ACL 3000:
a. Select Firewall > QoS > Classifier from the navigation tree.
b. Click Add.
c. Enter the class name classifier_dbserver.
d. Click Apply.
Figure 210 Creating class classifier_dbserver
e. Select classifier_dbserver on the classifier list and click its icon.
f. Click Create.
g. Select the ACL option and select ACL 3000.
h. Click Apply.