Manualshelf

F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
321322323324325326327328329330
305
b.
Click Add.
c.
Enter the behavior name behavior_mserver.
d.
Click Apply.
e.
Click the icon for behavior_mserver on the behavior list.
f.
Select the Dot1p box, and then select 3 in its list.
g.
Click Apply.
The configuration progress dialog box appears.
h.
Click Close when the progress dialog box prompts that the configuration succeeds.
9.
Configure traffic behavior behavior_fserver to mark packets with local precedence value 2:
a.
On the page display traffic behaviors, click Add.
b.
Enter the behavior name behavior_fserver.
c.
Click Apply.
d.
Click the icon for behavior_fserver on the behavior list.
e.
Select the Dot1p box, and then select 2 in its list.
f.
Click Apply.
The configuration progress dialog box appears.
g.
Click Close when the progress dialog box prompts that the configuration succeeds.
10.
Create QoS policy policy_server, and configure class-behavior associations for the policy:
a.
Select Firewall > QoS > Policy from the navigation tree.
b.
Click Add.
c.
Enter the policy name policy_server.
d.
Click Apply.
Figure 214 Creating policy policy_server
e.
Select policy_server from the Policy Name list above the policy list.
f.
Click Add Relation.
g.
Select class_dbserver in the Classifier Name list. Select behavior_dbserver in the Behavior
Name list.
h.
Click Apply.