F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

11
Figure 9 Displaying interface statistics
6. Shut down interface GigabitEthernet 0/1:
a. Click Back on the Port Statistics page.
b. Click the icon for GigabitEthernet0/1.
c. Click Disable at the end of the Interface Status line.
GigabitEthernet 0/1 is shut down, and Host A cannot access the firewall.
62B
Managing interfaces at the CLI
367B Performing general configurations
This section describes the settings common to Layer 2 and Layer 3 Ethernet interfaces or subinterfaces.
For more information about the settings specific to a type of Ethernet interfaces, see "
2156H Configuring a Layer
2 Ethernet interface or subinterface" and "
2157H Configuring a Layer 3 Ethernet interface or subinterface."
368B Configuring a combo interface
The following matrix shows the feature and hardware compatibility:
Hardware Feature com
p
atible
F1000-A-EI/F1000-S-EI Yes