F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

318
Figure 232 Network diagram
1328BConfiguring the firewall
1. Configure a CAR list:
a. Select Firewall > Traffic Policing > CAR List from the navigation tree.
b. Click Add.
c. Enter 1 as the CAR list index.
d. Select Source IP from the IP Type list.
e. Select IP Range from the IP Set list.
f. Enter 2.1.1.1 as the start IP address.
g. Enter 2.1.1.100 as the end IP address.
h. Select Enable from the Limit Rate Per IP Address list.
i. Select Enable from the Share Bandwidth list.
j. Click Apply.
Figure 233 Configuring a CAR list
2. Apply the CAR list to the interface:
a. Select Firewall > Traffic Policing > Apply from the navigation tree.
b. Click Apply Policy.
c. Select GigabitEthernet 0/1 from the Interface Name list.