F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

319
d. Select Inbound from the Direction list.
e. Enter 1 in the CAR List Index field.
f. Enter 50 in the CIR field.
g. Select the Pass option for Green.
h. Select the Discard option for Red.
i. Click Apply.
Figure 234 Applying the CAR list to the interface
155B
Configuring traffic policing at the CLI
Configure traffic policing by using either policy approach or non-policy approach. In non-policy
approach, you can configure CAR list-based traffic policing, ACL-based traffic policing, and traffic
policing for all traffic.
616BConfiguring traffic policing by using policy approach
Ste
p
Command
35. Enter system view.
system-view
36. Create a class and enter class view.
traffic classifier classifier-name [ operator { and | or } ]
37. Configure match criteria.
if-match [ not ] match-criteria
38. Return to system view.
quit
39. Create a behavior and enter behavior view.
traffic behavior behavior-name
40. Configure a traffic policing action.
car cir committed-information-rate [ cbs
committed-burst-size [ ebs excess-burst-size ] ] [ green
action ] [ red action ]
41. Return to system view.
quit
42. Create a policy and enter policy view.
qos policy policy-name