F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

328
27BConfiguring static routing
The term "router" in this document refers to both routers and routing-capable firewalls and UTM devices.
Static routes are manually configured. If a network's topology is simple, you only need to configure static
routes for the network to work properly.
Static routes cannot adapt to network topology changes. If a fault or a topological change occurs in the
network, the network administrator must modify the static routes manually.
162B
Configuring a static route in the Web interface
620BConfiguring static routes
1. Select Network > Routing Management > Static Routing from the navigation tree.
The static route configuration page appears.
Figure 236 Static route configuration page
2. Click Add.
The page for configuring a static route appears.
Figure 237 Creating a static route
3. Create a static route as described in 2519HTable 46.
4. Click Apply.