Manualshelf

F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
351352353354355356357358359360
330
c. Enter 0.0.0.0 as the destination IP address, select 0.0.0.0 from the mask list, and enter 1.1.4.2
as the next hop.
d. Click Apply.
Figure 239 Configuring a static route on Device A
4. Configure a static route to Device A and a static route to Device C on Device B:
a. Select Network > Routing Management > Static Routing from the navigation tree.
b. Click Add.
c. Enter 1.1.2.0 as the destination IP address, select 255.255.255.0 from the mask list, and enter
1.1.4.1 as the next hop.
d. Click Apply.
e. Click Add.
f. Enter 1.1.3.0 as the destination IP address, select 255.255.255.0 from the mask list, and enter
1.1.5.6 as the next hop.
g. Click Apply.
5. Configure a static route to Device B on Device C:
a. Select Network > Routing Management > Static Routing from the navigation tree.
b. Click Add.
c. Enter 0.0.0.0 as the destination IP address, select 0.0.0.0 from the mask list, and enter 1.1.5.5
as the next hop.
d. Click Apply.
1336BVerifying the configuration
1. Ping Host A on Host B (suppose the host runs Windows XP):
C:\Documents and Settings\Administrator>ping 1.1.2.2
Pinging 1.1.2.2 with 32 bytes of data:
Reply from 1.1.2.2: bytes=32 time=1ms TTL=128
Reply from 1.1.2.2: bytes=32 time=1ms TTL=128
Reply from 1.1.2.2: bytes=32 time=1ms TTL=128
Reply from 1.1.2.2: bytes=32 time=1ms TTL=128