F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

336
Reply from 1.1.2.2: bytes=32 time=1ms TTL=126
Reply from 1.1.2.2: bytes=32 time=1ms TTL=126
Reply from 1.1.2.2: bytes=32 time=1ms TTL=126
Ping statistics for 1.1.2.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms
# Use the tracert command on Host B to test the reachability of Host A.
C:\Documents and Settings\Administrator>tracert 1.1.2.2
Tracing route to 1.1.2.2 over a maximum of 30 hops
1 <1 ms <1 ms <1 ms 1.1.6.1
2 <1 ms <1 ms <1 ms 1.1.4.1
3 1 ms <1 ms <1 ms 1.1.2.2
Trace complete.
625BBFD for static routes configuration example (direct next hop)
The following matrix shows the configuration example and hardware compatibility:
Hardware Exam
p
le a
pp
licable
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
Firewall module No
U200-A No
U200-S No
1341BNetwork requirements
In 2522HFigure 241, configure a static route to subnet 120.1.1.0/24 on Firewall A, and configure a static route
to subnet 121.1.1.0/24 on Firewall B. Enable BFD for both routes. Configure a static route to subnet
12 0 .1.1.0 / 24 a n d a s t a t i c ro u t e t o s u b n e t 121.1.1.0 / 24 o n R o u t e r. W h e n t h e l i n k b e t we e n Fi r e wa l l A a n d
Firewall B through the Layer 2 switch fails, BFD can detect the failure immediately and inform Firewall A
and Firewall B to communicate through Router.