F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

346
Figure 245 RIP interface configuration page
4. Configure RIP interface as described in 2528HTable 48.
5. Click Apply.
Table 48 Configuration items
Item Descri
p
tion
Interface Displays the RIP interface name.
Work State
Set whether to allow the receiving/sending of RIP packets on the interface:
• On—Allows the receiving/sending of RIP packets on the interface.
• Off—Disallows the receiving/sending of RIP packets on the interface.
Version
Specify a RIP version for the interface:
• Default—Indicates that the interface can send RIPv1 broadcasts and can receive
RIPv1 broadcast and unicast packets, and RIPv2 broadcast, multicast, and unicast
packets.
• RIPv1—Indicates that the interface can send RIPv1 broadcasts, and can receive
RIPv1 broadcasts and RIPv1 unicasts.
• RIPv2—Indicates that the interface can send RIPv2 multicasts and can receive RIPv2
unicasts, broadcasts and multicasts.
• RIPv2 broadcast—Indicates that the interface can send RIPv2 broadcasts and can
receive RIPv1 unicasts, and broadcasts, and RIPv2 broadcasts, multicasts and
unicasts.