F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

407
Reply from 10.4.1.1: bytes=56 Sequence=2 ttl=253 time=1 ms
Reply from 10.4.1.1: bytes=56 Sequence=3 ttl=253 time=1 ms
Reply from 10.4.1.1: bytes=56 Sequence=4 ttl=253 time=1 ms
Reply from 10.4.1.1: bytes=56 Sequence=5 ttl=253 time=1 ms
--- 10.4.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms
659BOSPF route redistribution configuration example
1436BNetwork requirements
• Enable OSPF on all the devices.
• Split the AS into three areas.
• Configure Router A and Router B as ABRs.
• Configure Firewall as an ASBR to redistribute external routes (static routes).
Figure 270 Network diagram
1437BConfiguration procedure
1. Configure IP addresses for interfaces. (Details not shown.)
2. Configure basic OSPF (see "2604HBasic OSPF").
3. Configure OSPF to redistribute routes:
# On Firewall, configure a static route destined for network 3.1.2.0/24.
<Firewall> system-view
[Firewall] ip route-static 3.1.2.1 24 10.4.1.2
# On Firewall, configure OSPF to redistribute the static route.
[Firewall] ospf 1
[Firewall-ospf-1] import-route static
4. Verify the configuration:
# Display ABR/ASBR information on Router C.
<RouterC> display ospf abr-asbr