F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

429
31BConfiguring IS-IS
The term "router" in this document refers to both routers and routing-capable firewalls and UTM devices.
IS-IS can be configured only at the CLI.
171B
Feature and hardware compatibility
Hardware IS-IS com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
Firewall module No
U200-A No
U200-S No
172B
Overview
Intermediate System-to-Intermediate System (IS-IS) is a dynamic routing protocol designed by the ISO to
operate on the connectionless network protocol (CLNP).
IS-IS was modified and extended in RFC 1195 by the IETF for application in both TCP/IP and OSI
reference models, called "Integrated IS-IS" or "Dual IS-IS."
IS-IS is an IGP used within an AS. It uses the SPF algorithm for route calculation.
173B
IS-IS configuration task list
Task Remarks
2610H
Configuring basic
IS-IS
2611H
Enabling IS-IS
Required
2612H
Configuring the IS level and circuit level
2613H
Configuring P2P network type of an interface
2614H
Configuring IS-IS
routing information
control
2615H
Configuring IS-IS link cost Optional
2616H
Specifying a preference for IS-IS Required
2617H
Configuring the maximum number of ECMP routes Optional
2618H
Configuring IS-IS route summarization Optional
2619H
Advertising a default route Optional
2620H
Configuring IS-IS route redistribution Optional
2621H
Configuring IS-IS route filtering Optional