F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

457

Figure 281 Network diagram

1475BConfiguration procedure

1. Configure IP addresses for interfaces. (Details not shown.)

2. Configure basic IS-IS:

# Configure Router A.

<RouterA> system-view

[RouterA] isis 1

[RouterA-isis-1] is-level level-1

[RouterA-isis-1] network-entity 10.0000.0000.0001.00

[RouterA-isis-1] quit

[RouterA] interface gigabitethernet 1/1

[RouterA-GigabitEthernet1/1] isis enable 1

[RouterA-GigabitEthernet1/1] quit

# Configure Router B.

<RouterB> system-view

[RouterB] isis 1

[RouterB-isis-1] is-level level-1

[RouterB-isis-1] network-entity 10.0000.0000.0002.00

[RouterB-isis-1] quit

[RouterB] interface gigabitethernet 1/1

[RouterB-GigabitEthernet1/1] isis enable 1

[RouterB-GigabitEthernet1/1] quit

# Configure Router C.

<RouterC> system-view

[RouterC] isis 1

[RouterC-isis-1] network-entity 10.0000.0000.0003.00

[RouterC-isis-1] quit

[RouterC] interface gigabitethernet 1/1

[RouterC-GigabitEthernet1/1] isis enable 1

[RouterC-GigabitEthernet1/1] quit

[RouterC] interface gigabitethernet 1/2

[RouterC-GigabitEthernet1/2] isis enable 1

[RouterC-GigabitEthernet1/2] quit