F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

461

Figure 282 Network diagram

1477BConfiguration procedure

1. Configure IP addresses for interfaces. (Details not shown.)

2. Configure basic IS-IS:

# Configure Device A.

<Device A> system-view

[Device A] isis 1

[DeviceA-isis-1] network-entity 10.0000.0000.0001.00

[DeviceA-isis-1] is-level level-1

[DeviceA-isis-1] quit

[DeviceA] interface gigabitethernet 1/1

[DeviceA-GigabitEthernet1/1] isis enable 1

[DeviceA-GigabitEthernet1/1] quit

# Configure Device B.

<DeviceB> system-view

[DeviceB] isis 1

[DeviceB-isis-1] network-entity 10.0000.0000.0002.00

[DeviceB-isis-1] is-level level-1

[DeviceB-isis-1] quit

[DeviceB] interface gigabitethernet 1/1

[DeviceB-GigabitEthernet1/1] isis enable 1

[DeviceB-GigabitEthernet1/1] quit

# Configure Device C.

<DeviceC> system-view

[DeviceC] isis 1

[DeviceC-isis-1] network-entity 10.0000.0000.0003.00

[DeviceC-isis-1] quit

[DeviceC] interface gigabitethernet 1/1

[DeviceC-GigabitEthernet1/1] isis enable 1

[DeviceC-GigabitEthernet1/1] quit

[DeviceC] interface gigabitethernet 1/2

[DeviceC-GigabitEthernet1/2] isis enable 1

[DeviceC-GigabitEthernet1/2] quit