F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

467
2. After you complete BGP peer configurations, click Show Peer on the Show Information tab.
The page for displaying the BGP peer information appears.
Figure 286 Displaying BGP peer information
Table 57 Field description
Field Descri
p
tion
Peer IP Address IP address of the BGP peer.
Peer AS AS number of the BGP peer.
Version BGP version.
State Current state of the BGP peer.
707BBGP configuration example
In this example, Device A is the firewall.
1478BNetwork requirements
In the following figure are all BGP devices. Between Device A and Device B is an EBGP connection. IBGP
speakers Device B, Device C, and Device D are fully meshed.
Figure 287 Network diagram
1479BConfiguring Device A
1. Configure IP addresses for interfaces and add interfaces to the security zones. (Details not shown.)
2. Enable BGP:
d. Select Network > Routing Management > BGP from the navigation tree of Device B.
The BGP configuration page appears.