F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

475
Ste
p
Command Remarks
480. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ipv4-family vpn-instance
vpn-instance-name
Use either approach.
481. Create an EBGP peer group group group-name external N/A
482. Create a BGP peer and
specify its AS number.
peer ip-address as-number
as-number
N/A
483. Add a peer into the EBGP
peer group.
peer ip-address group group-name
[ as-number as-number ]
The as-number as-number option,
if used, must specify the same AS
number as the peer ip-address
as-number as-number command.
484. Enable the default use of IPv4
unicast address family for the
peers that are established
using the peer as-number
command.
default ipv4-unicast
Optional.
Enabled by default.
This command is not supported in
BGP-VPN instance view.
485. Enable a peer. peer ip-address enable
Optional.
Enabled by default.
486. Configure a description for a
peer group.
peer group-name description
description-text
Optional.
By default, no description is
configured for the peer group.
To configure an EBGP peer group by using Approach 3:
Ste
p
Command Remarks
487. Enter system view.
system-view N/A
488. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ipv4-family vpn-instance
vpn-instance-name
Use either approach.
489. Create an EBGP peer group.
group group-name external N/A
490. Add a peer into the EBGP
peer group.
peer ip-address group group-name
as-number as-number
N/A
491. Enable a peer. peer ip-address enable
Optional.
Enabled by default.
492. Configure a description for a
peer group.
peer group-name description
description-text
Optional.
By default, no description is
configured for the peer group.