F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Configuration Guide-6PW100

516

Figure 300 Network diagram

1532BConfiguration procedure

1. Configure IP addresses for interfaces. (Details not shown.)

2. Configure EBGP connections:

# Configure Firewall.

<Firewall> system-view

[Firewall] bgp 10

[Firewall-bgp] router-id 1.1.1.1

[Firewall-bgp] peer 200.1.2.2 as-number 20

[Firewall-bgp] network 9.1.1.0 255.255.255.0

[Firewall-bgp] quit

# Configure Router B.

<RouterB> system-view

[RouterB] bgp 20

[RouterB-bgp] router-id 2.2.2.2

[RouterB-bgp] peer 200.1.2.1 as-number 10

[RouterB-bgp] peer 200.1.3.2 as-number 30

[RouterB-bgp] quit

# Configure Router A.

<RouterA> system-view

[RouterA] bgp 30

[RouterA-bgp] router-id 3.3.3.3

[RouterA-bgp] peer 200.1.3.1 as-number 20

[RouterA-bgp] quit

# Display BGP routing table information on Router B.

[RouterB] display bgp routing-table 9.1.1.0

BGP local router ID : 2.2.2.2

Local AS number : 20

Paths: 1 available, 1 best

BGP routing table entry information of 9.1.1.0/24:

From : 200.1.2.1 (1.1.1.1)

Original nexthop: 200.1.2.1

AS-path : 10